Totter Trail type 02
Order number 4.03020
Play value
Our Totter Trail comprises several small modules elements offering a variety ofactivities, such as climbing, balancing and going through openings. The spaciousness of the trail doesn't just provide enough room for movement; it even accommodates imaginative role-playinggames too. The equipment can be accessed via a climbing trunk and several inclined walls. Meanwhile, children can learn about and experience their sense of balance on the moving ropes, balanceblocks and bridge.
Recommended for
- children under 3 years
- kindergarten children
- supervised play areas such as kindergartens, schools
- after-school programmes or similar
- public play areas without supervision such as playgrounds, parks or similar
- 1a Bevel cut
Vertical stand posts with bevelled end grain section as constructive wood preservation measure
- 3 Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape
- 4 Claddings
Claddings made of mountain larch (4 – 5 cm). Peeled white by hand, natura
- 6 Tongue and groove
Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling of dust / sand, protection against direct rain
- 19 Richter Hercules type rope
Richter Hercules type rope, a combination of galvanised six-strand steel cables and polyester yarn, diameter > 20 mm, laid and glued with very good abrasion resistance, strong sheathing even in the case of damage by puncturing
- 20 Aluminium rope pressing
Aluminium rope pressing, cylindrically pressed, with rounded ends
- 26 Rope connection with joint
Close-fitting connection with joint, without dangerous openings, with sintered bush and adjustable screw connection
- 29 Profiled washer
Profiled washer for covering protruding screw heads according to standard, improved pressure distribution and protection against water. Impedes loosening the bolt
- 30 Adjustable
Adjustable two-piece bolt connection, easy to maintain, no projecting threads
- 33 Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary
- 41 Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel