Tower Combination 54, larch with steel feet
Order number L2.54001
Play value
This play structure is distinguished by its formally balanced towers, which invite you to climb. But you can also hide in the small rooms and feel safe there. There are different possibilities to reach the height and there are different degrees of difficulty. The towers are connected by a chain bridge and a suspension bridge. Some skill is needed to get from one side to the other.
Recommended for
- schoolchildren
- supervised play areas such as kindergartens, schools, after school programmes or similar
- public play areas without supervision such as playgrounds, parks or similar
- swimming pools without supervision, such as outdoor pools, adventure pools or similar
- 1a Bevel cut
Vertical stand posts with bevelled end grain section as constructive wood preservation measure
- 2 Perforated
The earth / air zone of the wood is perforated by numerous small bore holes to ensure that the impregnating agent penetrates this particularly endangered zone
- 3 Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape
- 4 Claddings
Claddings made of mountain larch (4 – 5 cm). Peeled white by hand, natura
- 8 Hardwood rungs
Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled and mortised, secured against twisting, easy to grip and not cold for children to touch
- 9 Plywood
Plywood made of mountain larch, three-layer (3 cm) or five-layer (4 cm). High dimensional stability, waterproof, glued according
- 14 One-piece construction
Total construction of the slide made of 2 mm stainless steel, drawn in box form, surface glass bead blasted, without welding seam between sliding surface and side cheek
- 19 Richter Hercules type rope
Richter Hercules type rope, a combination of galvanised six-strand steel cables and polyester yarn, diameter > 20 mm, laid and glued with very good abrasion resistance, strong sheathing even in the case of damage by puncturing
- 26 Rope connection with joint
Close-fitting connection with joint, without dangerous openings, with sintered bush and adjustable screw connection
- 29 Profiled washer
Profiled washer for covering protruding screw heads according to standard, improved pressure distribution and protection against water. Impedes loosening the bolt
- 30 Adjustable
Adjustable two-piece bolt connection, easy to maintain, no projecting threads
- 33 Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary
- 41 Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel
- 43 Chains
Chains made of hot-dip galvanized steel (1.4301 / 1.4571 at extra charge) welded before galvanising, short-linked, without eyelets on the connecting parts, easy to exchange and shorten
- 1 Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced