Tower Combination 49 made of larch
Order number L2.49000
This play structure is distinguished by its formally balanced towers, which invite you to climb. But you can also hide in the small rooms and feel safe there. There are different possibilities to reach the height and there are different degrees of difficulty. The two towers are connected by a chain bridge. Some skills are necessary to get from one side to the other.
- schoolchildren
- supervised play areas such as kindergartens, schools, after school programmes or similar
- public play areas without supervision such as playgrounds, parks or similar
- swimming pools without supervision, such as outdoor pools, adventure pools or similar
Info
Attention! Technical modifications reserved. Request current assembly instructions for site dimensions.Designer
Richter Spielgeräte GmbHShare Tower Combination 49 made of larch
Bevel cut
Vertical stand posts with bevelled end grain section as constructive wood preservation measure
Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced
Perforated
The earth / air zone of the wood is perforated by numerous small bore holes to ensure that the impregnating agent penetrates this particularly endangered zone
Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape
Claddings
Claddings made of mountain larch (4 – 5 cm). Peeled white by hand, natural tree surface remains tangible and perceptible
Hardwood rungs
Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled and mortised, secured against twisting, easy to grip and not cold for children to touch
Plywood
Plywood made of mountain larch, three-layer (3 cm) or five-layer (4 cm). High dimensional stability, waterproof, glued according to DIN EN 13353:2011
One-piece construction
Total construction of the slide made of 2 mm stainless steel, drawn in box form, surface glass bead blasted, without welding seam between sliding surface and side cheek
Rope connection with joint
Close-fitting connection with joint, without dangerous openings, with sintered bush and adjustable screw connection
Profiled washer
Profiled washer for covering protruding screw heads according to standard, improved pressure distribution and protection against water. Impedes loosening the bolt
Adjustable
Adjustable two-piece bolt connection, easy to maintain, no projecting threads
Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary
Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel