© Richter Spielgeräte GmbH
CO₂ ✓
Quadro-Hammock Seat
for kindergarden children
Order number L6.43600
Other productversions
This friendly swing equipment is especially fun for two. Children can swing each other and talk in relaxed pose, almost like in a hammock. More energetic swinging is also possible however, and the unusual lying posture when swinging, increases the pleasure.
The Quadro Hammock Seat is an amusing alternative to the Double Hammock Seat offering the possibility of additional play opportunities. Thanks to additional transverse webs made from rope, the Double Hammock Seat is also suitable for use in nursery schools.
The Quadro Hammock Seat is an amusing alternative to the Double Hammock Seat offering the possibility of additional play opportunities. Thanks to additional transverse webs made from rope, the Double Hammock Seat is also suitable for use in nursery schools.
- Kindergarten children
- School children
- Supervised play areas, such as kindergartens, schools, after-school programmes or similar
- Public play areas without supervision, such as playgrounds, parks or similar
Info
Attention! Technical modifications reserved. Request current assembly instructions for site dimensions.Designer
Richter Spielgeräte GmbHShare Quadro-Hammock Seat
Bevel cut
Vertical stand posts with bevelled end grain section as constructive wood preservation measure
Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced
Swing seat
Ergonomically shaped swing seat made of rubber with soft shock absorbing edge. Durable due to strong profiled steel insert
Richter Hercules type rope
Richter Hercules type rope, a combination of galvanised six-strand steel cables and polyester yarn, diameter > 20 mm, laid and glued with very good abrasion resistance, strong sheathing even in the case of damage by puncturing
Aluminium rope pressing
Aluminium rope pressing, cylindrically pressed, with rounded ends
S-connectors
S-connectors Ø 8.1 mm, made of high-quality stainless steel, rounded
Universal joint
Drop-forged, hot-dip galvanised universal joint, consists of two sintered bushes, for free swinging in any direction
Profiled washer
Profiled washer for covering protruding screw heads according to standard, improved pressure distribution and protection against water. Impedes loosening the bolt
Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary
Ground anchor
All parts used for anchoring to the ground are made of hot-dip galvanised steel or stainless steel