Small Twin-Masted Ship
Order number 8.02030
The appealing open construction of our Small Two-Master with its lovingly realistic details simply invites children to play joint role-play games. The lean bow with bridge and portholes can be climbed while in the nave there are bridges, a rotating steering wheel and masks with flags - it’s just like setting sail on the high seas. The stern can be conquered by big and little pirates via a suspension bridge or a climbing net. The next adventure can be planned at the round table with four stools under the platform in the cutter.
- kindergarten children
- schoolchildren
- public play areas without supervision, such as playgrounds, parks or similar
Info
Attention! Technical modifications reserved. Request current assembly instructions for site dimensions.Designer
Richter Spielgeräte GmbHReference playgrounds
Share Small Twin-Masted Ship
Bevel cut
Vertical stand posts with bevelled end grain section as constructive wood preservation measure
Peeled white
Palisades peeled white means that bark, cambium and sapwood are removed, the natural shape of the trunk is preserved and can be experienced
Core-free
Sawn-timbers core-free, thus decreasing occurrences of cracking and undesired changes in shape
Claddings
Claddings made of mountain larch (4 – 5 cm). Peeled white by hand, natural tree surface remains tangible and perceptible
Tongue and groove
Tongue and groove planks made of 4 cm solid wood, highly resilient, no trickling of dust / sand, protection against direct rain
Hardwood rungs
Climbing rungs made of hardwood (ash) Ø 4.2 cm, milled and mortised, secured against twisting, easy to grip and not cold for children to touch
Richter Hercules type rope
Richter Hercules type rope, a combination of galvanised six-strand steel cables and polyester yarn, diameter > 20 mm, laid and glued with very good abrasion resistance, strong sheathing even in the case of damage by puncturing
Aluminium rope pressing
Aluminium rope pressing, cylindrically pressed, with rounded ends
S-connectors
S-connectors Ø 8.1 mm, made of high-quality stainless steel, rounded
Rope connection with joint
Close-fitting connection with joint, without dangerous openings, with sintered bush and adjustable screw connection
Profiled washer
Profiled washer for covering protruding screw heads according to standard, improved pressure distribution and protection against water. Impedes loosening the bolt
Adjustable
Adjustable two-piece bolt connection, easy to maintain, no projecting threads
Sintered bush
For all reciprocating movements we use sintered plain bearings which are self-lubricating in use and can easily be exchanged if necessary